Hippo
Lord Hippo
Me nayber ses e's er rat.
I had a big rat in a shed at work today and it was that busy it didn’t see me which was a mistake. Nipped out of the shed and fetched a 20 gauge, then went back into the shed and said bye to mr rat
Hippo
Lord Hippo
Was yours called kev anorl?I had a big rat in a shed at work today and it was that busy it didn’t see me which was a mistake. Nipped out of the shed and fetched a 20 gauge, then went back into the shed and said bye to mr rat
saxavordian
Well-Known Member
Mornin
Drizzle early on but brightening up
Not be needing factor 50 in Scotland by the looks of it
Got me tools in the boot and a brolly, goin round to GF's to pick up her bags then see if there's any room left for mine
Should be heading north shortly, hoping for 35mpg+ from the FL
Still trying to figure out how to work the parking sensors
Stay busy all
Drizzle early on but brightening up
Not be needing factor 50 in Scotland by the looks of it
Got me tools in the boot and a brolly, goin round to GF's to pick up her bags then see if there's any room left for mine
Should be heading north shortly, hoping for 35mpg+ from the FL
Still trying to figure out how to work the parking sensors
Stay busy all
Morning All.
Still here (it seems).
I was making some axles for a friend out of 15mm Silver Steel round bar yesterday.
The end needed drilling and tapping at M8. Gosh that silver steel is tough. Very hard to cut the thread.
Got to work on My trike today to fix the seat or I would have to use the old failed seat which is very uncomfortable.
Have a lovely day.
Still here (it seems).
I was making some axles for a friend out of 15mm Silver Steel round bar yesterday.
The end needed drilling and tapping at M8. Gosh that silver steel is tough. Very hard to cut the thread.
Got to work on My trike today to fix the seat or I would have to use the old failed seat which is very uncomfortable.
Have a lovely day.
They should just activate when you engage reverse.
Button just under the screen on the dash to turn off/on
I've been selecting reverse then pressing the switch
Thanks I'll just leave it be in future
Yeah - you’ve been turning them off every time !I've been selecting reverse then pressing the switch
Thanks I'll just leave it be in future
GRATCH
HUGE MEMBER
I expect the rat is scared of having your sausage inside him.
Oh dear, oh dear, oh dear.Yes we have Lymes disease here, misses wasnt well yesterday didnt tell me until I came home from work...pounding headache
sharp neck pain high blood pressure/temp with blurred vision feeling sick n dizzy (well more dizzy that usual
Called the hospital & spoke to some nice peeps then had to take her up, got back at 05.45am this morning & went to my bed
got up at 07.15 to go to work. Twas a long day & now im feeling a bit tired.
Shes getting treatment for Lymes.
Hope it does her good. Give her my best wishes for a rapid recovery. Crossed fingers for you both.
When we or the dogs get one we put white spirit on it which they don't like then take it out very carefully with either the proper tool or tweezers. I believe the problem occurs when they have satiated themselves with your blood and then inject you with the nasties.Hope the tests come back okhave had 7 so far this year mainly dropping from the trees one was buried deep could not pull it out resorted to cutting it out with a Stanley blade
. The expensive dog pills work a treat, don't fink thay do em for yumans. Don't like the Idea of one getting that deep.
