Latest activity

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Live updates
  • andyfreelandy
    So shiny Handed discs. Must get right way around! Wow. No instructions and many you tubes that contradict !! Most say slots sloping to rear of car. Some say slots facing forward to cut into the pad in direction of travel !! Anyone have...
    • 20250715_172750.jpg
  • Wimblowdriver
    Wimblowdriver replied to the thread I would just like to say.
    https://en.wikipedia.org/wiki/Teton_Dam Might have been this one ^^ wot I was thinking of
  • Mark Piercy
    Mark Piercy replied to the thread P38A Back again.
    Holy crap batman.. I thought you going to say iran or somewhere like that😱
  • Brodie Bear 73
    Are there any alternatives for leather seats that fit Freelander 2
  • ovalandrover
    ovalandrover replied to the thread P38A Back again.
    By the way the town i mentioned is Longyearbyen on the Island of Svalbard Spitzbergen And the reason for carrying a rifle is Polar Bears
  • discool
    discool replied to the thread Disco 1 Footwells warm air.
    The heater system installed in the 300 series D1 is an air blending system therefore the heater matrix is always the same hot temp as the engine coolant flowing through it, to control heat entering the cab is by turning the two temp controls...
  • ovalandrover
    ovalandrover posted the thread P38A Back again in Range Rover.
    Ive just come bak from a town where if you leave the boundaries of the town by law you have to carry a loaded rifle. Also if the siren souds you have to go to the nearest house and stay inside untill the all clear. seeing as im back in the uk i...
  • Wimblowdriver
    Wimblowdriver replied to the thread I would just like to say.
    That is most important. The Yanks built one somewhere but it wouldn't fill. There was a geological fault and all the water was draining away. Must do a search and see if I can discover more.
  • Hippo
    Hippo replied to the thread I would just like to say.
    Which bit don't you agree wiv? Permitted development gave home owners greater options to build an eggstension on their home. Plastic, wood and brick. Overall size, its location and the space available are taken into account. Also distance to...
  • Wimblowdriver
    Wimblowdriver replied to the thread I would just like to say.
    That's another way of saying nobody will buy it 😁
  • Wimblowdriver
    Wimblowdriver replied to the thread I would just like to say.
    Have yer big toe surgically removed. Problem solved :cool:
  • Hippo
    Hippo replied to the thread I would just like to say.
    Am not sellin ma hippo. Gorrinuff useful posts in the other Freelander section.
  • td5jay
    td5jay replied to the thread Kinda misfire help.
    Thanks for the reply I'm gonna try the fuel purge before I set out for home
  • Blob
    Pop the A pillar trim off while you're in there. One screw behind the plastic Airbag cap at the top, think it's a T30 and then pour a watering can over the top edge to the windscreen, do it all the way across the top of the screen as you'll be...
  • Blob
    Blob replied to the thread L322 Blower delay.
    +1 for this
  • awkwardbob
    I don’t think it’s splashing back up, I think it’s getting into the bit behind the dash panel and splashing from there onto the door. If my end panel was on, I think the door would be dry. I’ll need to try it tomorrow -get inside with a camera
  • biketeacherdave
    biketeacherdave replied to the thread L322 Blower delay.
    You need to look at the blower resistor it's the most common cause
  • C
    cpdriley replied to the thread L322 Blower delay.
    Have changed the cabin filter and cleaned out as best I can.
  • C
    cpdriley replied to the thread L322 Blower delay.
    Doesn't blow at all to start with (rear is fine) then suddenly kicks in after roughly 30 mins, same on heat or cool.
  • Acdadefender1
    Acdadefender1 replied to the thread Horn not working!.
    New switch on route… any tips on disconnecting the wiring? The connector is a stubborn so and so
  • Blob
    Years ago, I knew a guy that grew cress on the carpet inside the door shut of his mate's Marina as it was so damp in there! Thing is, this one's got water splashing to about this height so there's no way that's coming through the scuttle and...
    • IMG_5018.jpeg
  • Mark Piercy
    That's my thoughts also. I see this on many cars that come in through winter with either water ingress or excess humidity in the cabin 🤔
  • tottot
    tottot replied to the thread Horn not working!.
    I have a special horn on mine for folk of a nervous disposition, starts as a hum of increasing volume before you get the full barp!:D:D Wonder if it will pass this years mot.
  • Mark Piercy
    Mark Piercy replied to the thread L322 Blower delay.
    Where is the little fan setup on the l322, it could be taking too long to monitor the air temp in cabin due to being dusty 🤔
  • Mark Piercy
    • f2c28d76d0bd0c1d606f663e517e4ca1.gif
  • tottot
    tottot replied to the thread nasty knock, any ideas?.
    As the piston is out honing it would take little time and be a benefit for new rings.
  • ovalandrover
    with the engine at TDC loosen the bolt on front of the cmshaft andpull sprocket off and then turn the camhaft untill it it is in the right position then refit the sprocket annd tighten the bolt you might hve to take the vacume pump off to get at...
  • awkwardbob
    Hi, no, I had the top of the dash out to fix the (original) stereo and then realised my fuel gauge is mid-calibrated so thought I might need to take it off again -so, lazily never popped it back on. Door seals seem ok, nothing obvious. Unless...
  • C
    cpdriley posted the thread L322 Blower delay in Range Rover.
    Good Afternoon, Can anyone recommend an air con/ heating cooling specialist for my L322 2006 Vogue please? First journey of the day the blower takes 30 mins to start to work but then works perfectly well. Second or third journey usually works...
  • C
    Hi, recently taken ownership of 2013 Freelander 2. Love it to drive, failed MOT on front spring but previous owner got both done for me. Advisory was rear wheel bearing noisy and rear brakes. Just got these done as I had noticed droning noise...
Back
Top