YRM FOOTWELL PANELS

Hi folks
I notice that the YRM supplied right hand drivers side footwell panel has the same size slot for clutch and brake.
My existing panel has a much deeper slot for the brake.
Is it a standard part and we have to cut it out to suit? I haven't got the brake bracket at the moment to check for fit.
Cheers Peter

Non servo brake needs just the small hole. Not sure if they do a servo version.
Cut mine recently when I fitted servo was quite easy to do with angle grinder.

+1 on the above.

Thanks guys,
I looked on the YRM site and it only showed the small hole type.
Mine has a servo fitted.
Angle grinder job.
cheers Peter