Won't run warm ?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Julian Williams

New Member
Posts
3
Location
Llanelli
Just had a Bobtail conversion done on a Disco 2 and despite fitting a new alloy tank, electric fuel pump and regulator, when the vehicle gets warm it cuts out and won't start again 'till it's cool. Anyone got any thoughts please ?
 
You may want to try a new crank position sensor.

Mine would cut out when warm, let it cool down and it would drive for 5 miles then stop again.

Cheers
 
Apparently the crank position sensor was one of the first things my mechanic tried. He says he also changed the Map sensor but to no avail. I know we put new performance ignition leads on as well as new plugs and two new coil packs but it still won't run wam... aaaarrrrhhhh !!!
 
Back
Top