Brokennuckel
New Member
- Posts
- 3
- Location
- Wrexham
Morning all . So I’ve purchased a sport blind with no keys .
First job keys . Purchased from Landy coded myself via immo autel scanner .
she wont start
1. cranks .
2. Fuel at pipes and high pressure pipes to injectors
3. Fuel to filter and after
What I have done
1. replaced lift pump
2. Replaced high pressure sensor on fuel rail . Due to fault code : code gone
3. Replaced fuel filter housing the the thinner male spout was glued on . ? Is this the pipe the blue / green quick release fitting from fuel pump goes on ?
4. Ordered the pressure bleed valve as that was glued together.? Is this the Schrader valve or bleed
5. Cut my hands to shreds and sun burnt.
It seems to me that the previous owner has had a fuel issue and just gave up. I’m no quitter but I have no experience with these cars and I’ve exhausted all I can do with google and a hunch any who could point me in the right direction I would be very grateful.
1.
First job keys . Purchased from Landy coded myself via immo autel scanner .
she wont start
1. cranks .
2. Fuel at pipes and high pressure pipes to injectors
3. Fuel to filter and after
What I have done
1. replaced lift pump
2. Replaced high pressure sensor on fuel rail . Due to fault code : code gone
3. Replaced fuel filter housing the the thinner male spout was glued on . ? Is this the pipe the blue / green quick release fitting from fuel pump goes on ?
4. Ordered the pressure bleed valve as that was glued together.? Is this the Schrader valve or bleed
5. Cut my hands to shreds and sun burnt.
It seems to me that the previous owner has had a fuel issue and just gave up. I’m no quitter but I have no experience with these cars and I’ve exhausted all I can do with google and a hunch any who could point me in the right direction I would be very grateful.
1.
