wipe motor parks in vertical position

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

thetreesurgeon

New Member
Posts
10
Hi, i;m a little confused and possibly stupid and about to have a nervous breakdown because,

after much arsing about i now have fitted a new wiper motor on my defender 96 300tdi. The wipers were wiping the right way before and sometimes parking correctly, but now:confused: with new motor they park vertical. The wheelboxes i have not touched so they cannot be upside down and motor is correct rh model, it parks with linkage in not out.

|Am i going mad or can i ajust where the motor parks by opening it up?

please please help

thanks
simon
 
So are you saying park is incorrect-unclip wiper arms allow motor to park and refit.

Or are you saying it goes totally the wrong way?-if so the wires from motor push fit on the socket on motor-check they are same way as old ones
 
so many thanks for your reply so quickly

yes it wipes wrong way, if i fitted wipers at park point it would then wipe down to the bonnet

the connection to the motor only fits one way i thought, five pins
 
thanks, yes i know what you mean, will try tomorrow, snowing now here in w.wales.

many many thanks,
cheers and i so hope it works, strange though if its brand new don't you think
 
i did open up the motor and move the cog to 180 different but when it parked again it was in the same place, how does it know where to park in relation to where the cog is?
blimey lifes to short
 
absolutely bloody fantastic link so grateful i can sleep tonight many thanks
cheers
simon
thankyou thankyou i owe you one.
 
yippie
yup moved park lobe and all is sunny, well snowy in my world now
fantastic and many thanks fanatic

for my sad tiny mind would this be a factory mistake then or is my 90 weird?
 
Back
Top