Can anybody post some photos of what it should look like so I can rebuild? Ideally a wee dimension showing where the bolt hole should be would be great too.
Thanks
View attachment 156662
Last edited:
Wing body work
- Thread starter Rorie
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Can anybody post some photos of what it should look like so I can rebuild? Ideally a wee dimension showing where the bolt hole should be would be great too.
Thanks
View attachment 156662
- Posts
- 11,023
- Location
- North of the Wall
I'm presuming that is the top hole to rad surround? The pictures are a tad to close in to get perspective, for me anyway!
I think you might need to find someone with a spare wing to enable an accurate measurement. I'll have a look at mine and see if it's possible to make a template of the corner???
I think you might need to find someone with a spare wing to enable an accurate measurement. I'll have a look at mine and see if it's possible to make a template of the corner???
flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
I have stripped and rebuilt my wing after a crash.
Can you redo the photo with that bit held in the right orientation so I can work out what bit it is - I think I know but just humour me.....
I can then post some photos of my wing in bits, I can’t take more as it’s all bolted back together now
Can you redo the photo with that bit held in the right orientation so I can work out what bit it is - I think I know but just humour me.....
I can then post some photos of my wing in bits, I can’t take more as it’s all bolted back together now
Oops, so I uploaded the same image twice which doesn't help! I've changed the first post to include the second image which may help.
Yes, this section connects to the front of the wing and onto the radiator. I have tried to find a part number for this section too, but only get 'radiator baffle plate' and I don't think it looks like the right thing. I've highlighted it on the parts drawing (although its not actually listed as a part in its self).
Here are a couple more pics to show the bit i'm talking about. And its the same on both sides i'm afraid haha.
Yes, this section connects to the front of the wing and onto the radiator. I have tried to find a part number for this section too, but only get 'radiator baffle plate' and I don't think it looks like the right thing. I've highlighted it on the parts drawing (although its not actually listed as a part in its self).
Here are a couple more pics to show the bit i'm talking about. And its the same on both sides i'm afraid haha.
flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
Aah that’s makes a lot more sense!
I see from above that measurements are coming your way but I will have a look st my photos see if anything is obvious. I was just replacing the headlight panel so may not have taken a good photo of that bit
I see from above that measurements are coming your way but I will have a look st my photos see if anything is obvious. I was just replacing the headlight panel so may not have taken a good photo of that bit
Similar threads
