winch security

h12ssy · Aug 28, 2010

hi all
after fitting a winch tray to my disco 2 facelift model a few months ago. i am now about to fit the winch apart from welding the winch to it is there any way of using shear nuts??? or some thing similar ? if so wher can they be obtained ???
regards
stevey

bigrichsri · Aug 28, 2010

h12ssy said:
hi all
after fitting a winch tray to my disco 2 facelift model a few months ago. i am now about to fit the winch apart from welding the winch to it is there any way of using shear nuts??? or some thing similar ? if so wher can they be obtained ???
regards
stevey

I've just welded a plate over the heads of the bolts so that they can't be undone. Also welded the bumper on as people often nick the whole bumper if they can't get the winch off.

PaulMc · Aug 28, 2010

h12ssy said:
hi all
after fitting a winch tray to my disco 2 facelift model a few months ago. i am now about to fit the winch apart from welding the winch to it is there any way of using shear nuts??? or some thing similar ? if so wher can they be obtained ???
regards
stevey

Take your pick, from here -

http://www.oec4x4.com/index.php?option=com_virtuemart&page=shop.browse&category_id=5&Itemid=54

Armour Rings (A2 Stainless or BZP Steel)

Case Hardened Steel, Closed Cap 'NoGo'

Case Hardened Steel, Open Cap 'NoGo'

Also Kinmar Permanent or Removable (with the special socket) Security Nuts, in either Stainless or BZP Steel -

.

winch security

h12ssy

New Member

bigrichsri

Active Member

PaulMc

Active Member

Similar threads