Winch Bumper...?

Hi everyone!

I am looking at a new winch bumper for my 90 and wondered if anyone has had any experience with the venom from Shire Fabrications?

I'll share a link here:
http://www.shirefabrications.com/wi...-tubular-winch-bumper-for-non-aircon-vehicles

https://m.ebay.co.uk/itm/Land-Rover...061946?hash=item4b3b0a0e3a:g:H2AAAOSwruhZkeew

Is there anything special that I should be looking for in a bumper? I really just need it so I can fit a winch for self recovery.

Thanks all.

Similar to the one I have fitted with some minor differences, Not sure of the brand on mine, but mine has a lower A bar frame.

A couple of things to look for, does it have a hilift jacking point if needed? some do, some do not.

Plus , mine is a low profile version that means the bottom of grille and the surround have to be cut away to allow the winch to be fitted.

You can see better photos of a similar one in the dixonfabrication web site to give you ideas. Again not the same as mine and no affiliation.
https://dixonfabrication.co.uk/index.php?route=product/category&path=87_89_104

Cheers

neilly said:

Similar to the one I have fitted with some minor differences, Not sure of the brand on mine, but mine has a lower A bar frame.

A couple of things to look for, does it have a hilift jacking point if needed? some do, some do not.

Plus , mine is a low profile version that means the bottom of grille and the surround have to be cut away to allow the winch to be fitted.

Click to expand...

Thanks for that! Just looking around on eBay I found the venom bumper on auction at £75 at the moment.

https://m.ebay.co.uk/itm/LAND-ROVER...404555?hash=item4b3a1b248b:g:WxMAAOSwvmRakWJ6

It might not be perfect (no jacking points :/ ) but seems great value at the moment! Would this do the job?