What bushes do I need? Castro corrected radius arms

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Nobbseyy

Member
Posts
11
Been trying to find what bushes I will need when I fit the new radius arms, I have ordered the rears, that connect to the chassis.

But Im unsure on the correct ones for the front. As I’ve read there’s metal sleeved ones and just rubber ones.

They are Adrenalin radius arms. If anyone has fitted these and or know what bushes are needed it would be much appreciated.

Thanks in advance:)
 
Ok great thanks a lot, next question is which would be the easiest to fit? Without a press, have seen people use just a vice to get them into place.
 
Will give them a call tommorow, just thought I’d see if I would have any luck on here, while ordering some other bits:)
 
Although poly bushes are easier to fit, I personally prefer the standard ones, although if you haven't got a big bolt and nut etc to pull then in and out, or a press, they can be sods to fit.

Peter
 
Back
Top