hi i'm brand fresh new on here, ive got a 110 defender which needs a replacement water pump. anyone know if i can get it reconditioned as i have tried everywhere for a water pump each one supplied fits the engine block the holes on the pulley are to close together (pcd too small) i am based in burnley thanks folks see ya
water pump
- Thread starter cotham
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
What part number are you asking for??
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
right just looked at both of those parts, 637 is a no no and the 635 looks close but there were no thread on the end for the viscous fan, the flange on mine is for the fan belt pulley to bolt onto not to drive the fan, supposedly its a petrol 2.5 pump is that possible??
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
365 has a green plastic cap protecting the threads on the shaft :doh:
http://www.lrseries.com/shop/produc...-WATER-PUMP.html?search=WATER PUMP 2.5&page=1
i have taken the pump into many parts places at first the they gave me a fwp1847 it fit the block perfact piped up ok but when i went to put the 4 bolt pully on my bolt holes are further apart but without the pully on there is a thread on the end of the shaft for my viscus to fasten straight on
that's the 200Tdi pump
STC635 IS the right one - http://www.lrseries.com/shop/product/listing/12471/STC635-WATER-PUMP.html?search=STC635&page=1
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
I'd suggest buying a pulley to go with the pump then as your's seems to be non std.
