VCU damper outer ring came off?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
A

andy06

New Member
Posts
2
Hi Guy's this is my first post and I hope you can give me some good advice.

We've got a Y Reg Freelander 1.8 GS. The Mrs was driving it today when she heard a noise and felt a jolt that moved her forward in the seat. Looking underneath the VCU damper outer ring was resting on the rear prop shaft.

Now, I've pushed the ring back on to stop the rattling and driven it home slowly, about three miles. But the local garage can't look at it for another 12 days or so and reading some of the other threads it sounds like it could be a bit nasty.

Driving it home it felt OK and there wasn't any undue noise but something made it come off.

Does anyone know what would cause the outer ring to come off like it has?

Thanks
 
I don't think its that simple to slip off the old damper and replace with a new one.I think you'll have to remove at least one bearing,might aswell replace both of them at the same time.You could angle grind it off,and leave it off till you've got the parts and time to do it yourself.
 
It's only fourteen bolts to drop the prop out for now.

Once it's out you can separate the the rear from the VCU with one further bolt (hidden in the forks of the UJ) and a bit of levering, and get a new ring/bolts/VCU depending on what's rusted out at you leisure.
 
That happened to my vcu damper t'other day.
I was thinking of cutting the ring once I got home or pumping silicone between the outer and inner ring.Its a tight fit,when it came off I stopped straight away and whacked the ring back on and drove the 12+ miles home.
I took the easy option and removed the prop shaft until I fix the leaking diff.When I do refit the prop I will try the silicone to bond the damper ring before I fork out for a new one.
 
Make sure yu get the correct one - I think the V6 is different from others.

dont forget it is held on with 3 bolts.

da2352.jpg
 
My damper outer ring on my freelander has come loose Ihave heard conflicting reports that you can simpy angle grind this off, and drive as normal , replace , and ive also been told that not all freelanders had this damper fitted , any help would be graet . thanks in advance ,
 
larmar said:
My damper outer ring on my freelander has come loose Ihave heard conflicting reports that you can simpy angle grind this off, and drive as normal , replace , and ive also been told that not all freelanders had this damper fitted , any help would be graet . thanks in advance ,
Click to expand...
Many have cut it off and not replaced it. Been ok. Others have replaced theirs. I guess it depends if you notice the difference of it being fitted or not. v6 doesn't have a damper.
 
You must log in or register to reply here.

Similar threads

xDParis64
VCU Longevity when used mainly off-road
Replies
7
Views
856
Hippo
Hippo
S
Black and White Smoke 1988 90
Replies
6
Views
355
tottot
tottot
L
Freelander 1 Rear axle noise
Replies
1
Views
1K
landycrowford
L
W
Freelander 1 TD4 rumble from..?
Replies
7
Views
2K
Nodge68
Nodge68
andyfreelandy
Freelander 1 TD4 Alternator fell off !!
Replies
14
Views
2K
freelandertd4bmw
F
Back
Top