Mid life crisis
Member
- Posts
- 48
- Location
- Gloucestershire
Just wondered if anyone knows what size the vacuum hoses are on the 3.0 td6? There's a few of them that are nearly worn through so going to go through and replace the lot. Thanks in advance
L322 Vacuum hoses
- Thread starter Mid life crisis
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Henry_b
Think outside, no box required.
- Posts
- 15,353
- Location
- somewhere else
Pipe sizes vary i used some standard rubber hose on a 4.4
3mm, 5mm and 3/16.
Only small segments mind you but the above did fine..
3mm, 5mm and 3/16.
Only small segments mind you but the above did fine..
Mid life crisis
Member
- Posts
- 48
- Location
- Gloucestershire
I thought all the vacuum hoses were the same inside diameter, from what I've read they seem to be 5mm what people replace them with but just wanted confirmation before going to buy a few metres of it. Thanks
Henry_b
Think outside, no box required.
- Posts
- 15,353
- Location
- somewhere else
Yes most if not all are 5mm i just bought some surplus to do some other bits..
Mid life crisis
Member
- Posts
- 48
- Location
- Gloucestershire
Cheers
