Urgent!!

gil · Aug 28, 2009

Does anyone know where i can get a sump from by monday in the northwest. I have a MOT on tuesday and have got 2 4mm holes in the bottom of the sump. I put in engine flush and then couldn't get the sump plug out to drop the oil!!

discool · Aug 28, 2009

I could give you a part number for a sump, that would aid your search with suppliers also someone may have one in their shed to let you have, but we can't as we don't know what disco it would be for.

nicedayforit · Aug 28, 2009

gil said:
Does anyone know where i can get a sump from by monday in the northwest. I have a MOT on tuesday and have got 2 4mm holes in the bottom of the sump. I put in engine flush and then couldn't get the sump plug out to drop the oil!!

If your are stuck you could use nuts,bolts, washers and rtv to seal the holes for now. Nut heads to the inside.

storm td5 · Aug 28, 2009

May be worth trying A1 4x4 breakers in Bury. Ive had some bits from them. 0161 797 7050 | 0161 763 9000

Wriggler · Aug 28, 2009

Another temporary fix is the epoxy metal available from most motor factors.

vivnap · Aug 28, 2009

another is weld it up

dr pepper · Aug 29, 2009

serious self tappers, the sort you get with mfi stuff, with copper washers under the head, no need to remove sump, it is tmporary though.

leekegs · Aug 31, 2009

hello
use two M5 capheads with some PTFE wrapped around the thread ( clockwise) and seal it with a good multi sealent ( loctite etc )

Urgent!!

gil

Active Member

discool

Well-Known Member

nicedayforit

New Member

storm td5

New Member

Wriggler

New Member

vivnap

Banned

dr pepper

New Member

leekegs

New Member

Similar threads