Disco 2 Upgraded windscreen washers

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

sierrafery

Well-Known Member
Posts
17,010
Location
Arad/Romania
bought this kit Rally CAR Windscreen Washer Jets Conversion KIT Bonnet Scuttle TO Wiper Arms | eBay , see the video but it was dusk so maybe you can't see it how nice it works, it's simply brilliant, plenty of liquid on the whole windscreen... took me 15 minutes to fit it, the tubing can be routed throug the plastic grille of the intake plenum, no drilling involved, just undid the tube from the bonnet and joined the new with T piece, i'll make some adjustments on the nozzles in time after i see how they work at speed too but as first impression i'm very happy with it



btw...i have D1 wiper arms it might not fit on original D2 ones
 
Looks like a good job, but why "see how they work at speed", I didn't know that your Landy would go fast enough to disturb the water flow.
The only mod I've done to my washers was to change the nozzles to D3 ones. They fit in the same size and shape holes but they are heated. I've got them wired to the front screen heater circuit.
 
I thought of fitting D3 heated nozzles too and i'll leave both circuits and fit a kind of tap or valve to switch those on for winter and these for summer
 
no i was thinking more simple to a manual split valve, but i'm sure that solenoid version is available too, i want both washer lines left in place and swap between them so the pump feed goes in and in the winter i open the heated ones and close the others and vice versa... that solenoid you posted is not fit for that

something like this but smaller
-font-b-Y-b-font-Type-Equal-font-b-Hose-b-font-Barbs-Three-Forks.jpg
 
Back
Top