Ian Mackay
Active Member
- Posts
- 316
- Location
- Scotland
Friend has got these for sale for £200 plus the trims, is this about right, fancy the more modern look and is this upgrade a fairly straightforward job!
Disco 2 Upgraded headlights
- Thread starter Ian Mackay
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
sierrafery
Well-Known Member
- Posts
- 17,103
- Location
- Arad/Romania
Which ones?
Ian Mackay
Active Member
- Posts
- 316
- Location
- Scotland
Eh, the ones that are fitted to the disco 2's 2002-2004, not aware there were different one's I want to fit them to my 2000 model with the big square ugly light and separate indicators.
- Posts
- 21,137
- Location
- In the next Glen
The facelift ones which you need to drill out the panel or cut it with an angle grinder
& fit the later panels, the ones to suit the newer model then rewire into the headlight looms
into your original loom, also fit a couple of relays for the dip & main beams as they are separate units
Then some ****t will nick them
& fit the later panels, the ones to suit the newer model then rewire into the headlight looms
into your original loom, also fit a couple of relays for the dip & main beams as they are separate units
Then some ****t will nick them
Ian Mackay
Active Member
- Posts
- 316
- Location
- Scotland
The facelift ones which you need to drill out the panel or cut it with an angle grinder
& fit the later panels, the ones to suit the newer model then rewire into the headlight looms
into your original loom, also fit a couple of relays for the dip & main beams as they are separate units
Then some ****t will nick them
Ian Mackay
Active Member
- Posts
- 316
- Location
- Scotland
Thanks mate, is there any cutting of the wing ?
- Posts
- 21,137
- Location
- In the next Glen
Yup facelift ones did you get looms with them ?? Loads of people have done this conversion
I'm sure I seen a proper guide with pics on the d2 forum on how to do it.
I was considering doing it to my d1 aswell
sierrafery
Well-Known Member
- Posts
- 17,103
- Location
- Arad/Romania
It's a hell of a job ... and the only gain is the aspect cos if a bulb blows when it's dark and raining you'll be wet to your balls untill you replace it ....see this for an ideea (unfortunately the photos are gone) https://www.landyzone.co.uk/land-rover/discovery-headlight-conversion-to-2003-on-lights.71266/
Interceptorxj
Well-Known Member
- Posts
- 1,635
- Location
- Bolton, Greater Manchester.
And every other D2 Facelift owner will be cursing you for driving round with stolen headlights (even if they're not)!
Ian Mackay
Active Member
- Posts
- 316
- Location
- Scotland
I put a reply on, it must have been on a private conversation, NEW & BOXED, with 2 trims £250, not stolen and not interested with the amount of work involved, almost considered it, 4 new Pirelli tyres put that well on the back burner.
Ian Mackay
Active Member
- Posts
- 316
- Location
- Scotland
No looms, new items.Yup facelift ones did you get looms with them ?? Loads of people have done this conversion
I'm sure I seen a proper guide with pics on the d2 forum on how to do it.
I was considering doing it to my d1 aswell
