Tuning project back on

Missing Link · Feb 14, 2010

Finally got the OK from the insurance company to modify my 2003 Td4 so I am resurecting the project. Bit puzzled about the both the EGR bypass and the Tuning box.

There appears to be two EGR bypass modules on e-bay, one black laquered and one stainless steel and both slagging each other off. On the face of it the stainless should be better but knowing the problems with welding this material anybody have an opinion which to go for.

Tuning-diesels for cheaper diesel tuning. seem to be quite authoratative on the Td4 and push the Synergy 2 but a general search reveals many others at distinctly varying prices from slightly cheaper to nearly 3 times the price. As they all seem to produce about the same levels of improvement any one have an idea what the differences are?

gcoo8154 · Feb 14, 2010

one stainless steel and both slagging each On the face of it the stainless should be better but knowing the problems with welding this material

problems when welding stainless

Missing Link · Feb 14, 2010

gcoo8154 said:
one stainless steel and both slagging each On the face of it the stainless should be better but knowing the problems with welding this material

problems when welding stainless

OK things have improved since I did welding as an apprentice (badly) but it still requires specific techniques to do a good job.

gcoo8154 · Feb 14, 2010

Missing Link said:
OK things have improved since I did welding as an apprentice (badly) but it still requires specific techniques to do a good job.

not really mate

only specific to the food industry ie purging pipes and so on for a 100% sealed join

as for an egr valve stuff like that is not critical

Chaser · Feb 14, 2010

Get the synergy 2 from Ron ( tuning-diesels) and the original powder coated egr bypass from Dave Lyon (evotomturbo) the others are just copies of his idea.

These are the two products that are tried and tested by many of us and nobody to my knowledge has ever had a bad word to say about either of them.

Ron will answer any questions re settings or other issues you may have with the synergy.
As for the bypass i can't see the need or advantage of using stainless. It's really only a hose connection in a rather oily inlet tract.

chromiumuk · Feb 15, 2010

The other worry with the stainless one is that one member reported that it came fitted with a small pipe union for a boost gauge which the seller tried to persuade him to connect his egr vacuum pipe to - not a good idea. The one you want will either have a very thin solid bar fitter which plugs the vacuum pipe or if it's an earlier design like mine then nothing at all & you just plug the pipe yourself. Speak to Roverron at Tuning diesels, he knows his stuff & don't buy the rally cheap crappy chips off ebay. Some have been known to blow the ecu. The Synergy unit is a good reliable piece of kit even recommended by Car Mechanics Magazine who tested & ran one in their Rover 75 some years back.

Missing Link · Feb 15, 2010

I must admit that I was leaning towards the Synergy 2 as the backup seems to be very good on RoverRons site and he is recommending the black EGR bypass from Dave Lyon. Just seems odd that others are charging over £400 for essentially the same a his unit.

Tuning project back on

Missing Link

New Member

gcoo8154

Well-Known Member

Missing Link

New Member

gcoo8154

Well-Known Member

Chaser

New Member

chromiumuk

Well-Known Member

Missing Link

New Member

Similar threads