Transmission lash

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
P

pornstarmax

Active Member
Posts
400
Ok just finished rear main seal, but sorting that highlighted another problem.

Rear Diff rotates about 1/4 of a turn before meshing. Backlash if you like so when backing on and offada throttle it makes big noise.

So howda fix it is diff worn, can i take out guts of front diff and replace into rear?

Max
 
I have the identical problem on a series 3 88" !

With handbrake off can rotate rear prop 1/4 turn by hand with ease, makes it judder like crazy when pulling away. Pulled half shafts out, they are all good, checked prop wear but it's all good.

Anyone confirm if it'd a worn rear diff? Can they wear or do they just brake?
 
:eek:

15308d1272139592-transmission-lash-diff-bits.jpg
 

Attachments

  • Diff bits.jpg
    Diff bits.jpg
    238.7 KB · Views: 295
  • Broken diff.jpg
    Broken diff.jpg
    243.2 KB · Views: 224
yu sure it aint play in the gearbox/Tbox? the intermediate drive gear is known to cause that sort of play when it is about to give up. New output shaft then on gearbox.
 
The Mad Hat Man said:
yu sure it aint play in the gearbox/Tbox? the intermediate drive gear is known to cause that sort of play when it is about to give up. New output shaft then on gearbox.
Click to expand...


I checked with Prop shaft removed - 1/4 turn play here, how would I distinguish this between G/Box?

Max
 
You must log in or register to reply here.

Similar threads

L
Freelander 1 Rear axle noise
Replies
1
Views
1K
landycrowford
L
H
FL2 - No Haldex?
Replies
16
Views
2K
Arctic2
Arctic2
xDParis64
Right...
Replies
9
Views
1K
pwood999
pwood999
A
Freelander 1 Yet more noises
Replies
15
Views
2K
Alex1000
A
Goc3k
Discovery 1 SOLD 1997 300TDI manual D1, Winchester
Replies
16
Views
4K
Goc3k
Goc3k
Back
Top