Transfer box

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Yes it should go straight on.
It will give you slightly higher gearing in high ratio which i personally think it makes the car much nicer to driver...better cruising speed etc.
Just swap the linkages over and away you go
 
boydy1989 said:
you will need to either swap the speedo drive/handbrake unit, or modify your defender handbrake linkage to fit also.
Click to expand...

Glad you mentioned that one. I just drilled and tapped the two addition mounting holes on the disco casing to take the defender handbrake mounts.
 
yeah i thought about that but it would weaken the aluminium casing, so i drilled two holes in the steel linkage bit, and used old propshaft nuts, as they make perfect spacers to hold it away from the housing the right amount!
 
boydy1989 said:
yeah i thought about that but it would weaken the aluminium casing, so i drilled two holes in the steel linkage bit, and used old propshaft nuts, as they make perfect spacers to hold it away from the housing the right amount!
Click to expand...
#think about which way the force is acting on the bolts ;)
 
You must log in or register to reply here.

Similar threads

dave evans
Transfer box
Replies
3
Views
639
dag019
dag019
dag019
A question of gearboxes
Replies
16
Views
1K
Skolmate
Skolmate
Henry.adams
Lt77 and r380
Replies
1
Views
838
miktdish
miktdish
R
Defender TD5 oil change
Replies
3
Views
608
miktdish
miktdish
stoney424
What colour speedo drive gear should I be using?
Replies
3
Views
486
miktdish
miktdish
Back
Top