Track Rod Ends And Drag Link Joints

sniffmydiff · Jun 27, 2010

About to order Track Rod Ends And Drag Linkage ball joints, i presume i need 4? one each end of drag link and one either end of track rod im i right?? if so i need

2 x RH
1 x LH

Is the other one LH or RH?

And which is better Delphi or Lemforder???

Cheers

discool · Jun 27, 2010

Drag link is LH and RH, near side is the LH off side is RH
Track rod is RH x 2

I believe Lemforder a OEM i fitted two and the look the same as the original down to the castle nut and split pin.

sniffmydiff · Jun 27, 2010

discool said:
Drag link is LH and RH, near side is the LH off side is RH
Track rod is RH x 2

I believe Lemforder a OEM i fitted two and the look the same as the original down to the castle nut and split pin.

Cheers Discool,

So 3 RH and 1 LH track rod end will do it all?

not a typical one where there different on all discos are they lol,

and yeah Lemforder are OEM but im still swayed to Delphi Lockheed tho not sure why just like the name better i guess.

Well hopefully the 2 weeks i have to do a overhaul will pan out as i want and go well without injury or cock ups!

pauli · Jun 28, 2010

Have just done this with Delphi ball joints.
Getting old joints out was a swine-had to bring the arm into work and use big vice and very big stilson

Also before removing make sure you measure the distances the old ones are at and put the new ones in the same so tracking and steering centre are about right
Busterbus has a nice pictorial in his how to do list
Best of luck

discool · Jun 28, 2010

This is excellent.. http://www.landyzone.co.uk/lz/f41/track-rod-ends-renewal-99508.html

bustersbus · Jun 28, 2010

And here's the other one..

http://www.landyzone.co.uk/lz/f41/drag-link-ball-joint-renewal-82152.html

Track Rod Ends And Drag Link Joints

sniffmydiff

New Member

discool

Well-Known Member

sniffmydiff

New Member

pauli

New Member

discool

Well-Known Member

bustersbus

Well-Known Member

Similar threads