You can do that on a 200 but it means takin the timing belt cover off to get at it.
still the same - need to slacken the rear bracket anorl - only needs a small amount to make a big differance, we have found that by setting to factory figure (1.54mm) works best then play with diaghram spring height followed by moving the pressure pipe from the turbo to the inlet manifold makes a large increase in low down torque and upper power
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!
