Series 3 timing chain kit

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
kermit_rr

kermit_rr

Very
Full Member
Posts
33,864
Location
North Shropshire
Hi all, looking to change a noisy chain, but the only kit seems to be britpart.
Individually, genuine chains are available and not much more expensive, but should i just go with the kit or buy everything individually?
Cheers
 
If you have the time buy genuine individually. I did a chain service a few years ago, I got a list of part numbers for an article on the net and bought individually. I see if I can still find the article.
 
I fitted a budget chain a few years ago and already the diesel pump is on full adjustment so if the chain stretches any more It will have to be replaced again. I only drive the damn thing a few thousand miles a year and it’s a sod of a faff removing the front of the series to do.
Next time I will be getting a decent one that isn’t beaten out of milk bottle tops in a Mumbai sweatshop.
 
+1 on using a genuine chain. The chainwheels may be ok - I'm rebuilding a 17H engine that was in a state, but the chainwheels were fine to re-use. I used a non-genuine damper pad (quality seems ok) but the non-genuine tensioner was rubbish - didn't even fit the mounting holes - so I rebuilt the original one instead.
 
thanks everyone, I had an idea this might be the case.
Island and paddocks only sell britpart chains :( craddocks have a genuine one, but a couple of folks on here have been complaining about them recently
 
You must log in or register to reply here.

Similar threads

W
Land Rover series 3 diesel
Replies
3
Views
608
Wildefalcon
W
D
Disco 4 (LR4) 2016 DISCO 4 sdv6
Replies
2
Views
303
lynall
L
C
Evoque timing chain DIY...?
Replies
1
Views
1K
Nodge68
Nodge68
F
Britpart parallel glow plug kit
Replies
10
Views
1K
Rangieman123
Rangieman123
NeoX
Discovery 5 DTC on camshaft sensor - timing chain replacement?
2
Replies
27
Views
3K
NeoX
NeoX
Back
Top