that sinking feeling :-)

Have a freelander 2 2010 and the seat keeps on dropping, It's a manual operated seat action with a little lever you pump to raise the height. If I have it on the highest point it will drop over a couple of hours to its lowest point. Are there any fixes for this, something I need to tighten, replace etc. any hints on how to fix this would be good before I go ahead and rip out the seat and sit on a box.

Try wedging the height adjustment handle to rule out that as you get out the car you’re pushing the handle down as you do so.

Otherwise I think there’s a stronger height adjustment mechanism available which also helps - the first item is free to try second one costs money....

Stick a couple of bricks under the seat to stop it sinking. These can be utilised later to chock the wheels when the handbrake fails.

Col

mine does same, pain in the rear it is

snaggapuss did you solve your sinking feeling & if so how easy was it & how much.

Perhaps you need to lose some weight.

(Runs away and takes cover )

Hi I had the same problem turned out to me sliding out of the seat each time it lowered the seat adjuster a little
Put the seat to desired position fixed a block to the side of the seat under the adjuster lever job done

cheers for that denboy removed cover where seat belt goes through & placed block of wood under mechanism.
job done

Mine has the same issue, I assumed it dropped on its own whilst i wasnt in the car ...I'll have to look further thanks to this thread ..