Freelander 1 TD4 MOT Passed

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
pwood999

pwood999

Well-Known Member
Full Member
Posts
3,944
Location
Near Heathrow.
Just got a pass with only couple of advisories:
  • Centre high level brake light not working.
  • Bottom front ball joint rubbers deteriorated.
He said joints were ok, so just do them while the weather is good !!

Was also good to see a tester that didn't go near the brake rollers, but got his Tapley tester out instead.

IMG_2340.JPG
 
Another year on the books, great when they pass!
Most brake rollers run in opposite directions, which means little or no movement on the propshaft or vcu. Can be demonstrated by jacking up rear wheels and turning, the opposite wheel rotates the other way.
 
yep. Had a previous MOT idiot do roller handbrake test on my P38. He couldn't understand why the wheels kept moving, until I explained the centre propshaft handbrake !!
 
pwood999 said:
No. Minimum of two working brake lights. Same with rear view mirrors.
Click to expand...
Technically if the light is fitted, then it must work, unless it's been disconnected.
It's obviously one of those grey areas, but many MOT testers I know and use would fail a high level brake light that isn't working.
 
Nodge68 said:
Technically if the light is fitted, then it must work, unless it's been disconnected.
It's obviously one of those grey areas, but many MOT testers I know and use would fail a high level brake light that isn't working.
Click to expand...

Proving it's wired in without removal of panels is impossible.
 
Just for clarity in case of future searches: https://www.gov.uk/guidance/mot-ins...s/4-lamps-reflectors-and-electrical-equipment
  • Vehicles after 1971 must have minimum of 2 stop lamps.
  • Additional stop lamps, over and above the mandatory requirements, must be tested. However, if you are not sure if they are connected, you should give the benefit of the doubt.
  • (i) with a multiple light source up to 1/2 not functioning - Minor

upload_2022-8-7_12-47-22.png
 

Attachments

  • upload_2022-8-7_12-47-22.png
    upload_2022-8-7_12-47-22.png
    40.3 KB · Views: 77
I wonder what plod would make of this as they also use the construction & use act which differs from the mot regs as I understand it.
 
Andy Warren said:
I wonder what plod would make of this as they also use the construction & use act which differs from the mot regs as I understand it.
Click to expand...
Around here, the Mr Plod can't be bothered to do anything.
It seems they're too happy hiding in gateways, hoping to catch speeders.
The number of vehicles I see driving about with directive lights or bald tyres is staggering.:eek:
 
You must log in or register to reply here.

Similar threads

Freddie17
FL1 td4 lower suspension ball joint dust cover rotting…
Replies
13
Views
2K
Nodge68
Nodge68
F
Disco 2 MOT failure
Replies
14
Views
1K
frank1093
F
H
MOT Failed
Replies
3
Views
1K
Datatek
Datatek
frostythor
My Last MOT
Replies
1
Views
555
lynall
L
F
£300 Freelander project! ... my first ever Land Rover
2 3
Replies
44
Views
4K
pwood999
pwood999
Back
Top