td4 lower tie bar bush

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
ryan168

ryan168

New Member
Posts
270
Location
warks
Happy xmas all I'm looking to replace the lower tie bar bush on the old td4 its the larger of the 2 that has gone the other end seems fine. Can you buy just the large bush as I'm a tight git!!! if so would anyone have an idea where I could get one from. poly or std part numbers would be great as I'm chasing my tail on this one. Are petrol ones the same? Many thanks. Ryan
 
Yeah the small bush is fine just need to find out what fits the large bush might just order one off that site nodge and see!
 
Cheers for the link bukko just emailed them let's see if they know. all the best oh and merry christmas;)
 
Hi chaps still no wiser to if the petrol ones and td4 are the same anyone with a td4 changed just the large one if so where from there is one site offering a 56mm orange poly bush or a 60mm which is out of stock!! I've emailed them but no reply so none the wiser what fits!!! Not sure what to do now any help or advice would be most welcome
 
ryan168 said:
Hi chaps still no wiser to if the petrol ones and td4 are the same anyone with a td4 changed just the large one if so where from there is one site offering a 56mm orange poly bush or a 60mm which is out of stock!! I've emailed them but no reply so none the wiser what fits!!! Not sure what to do now any help or advice would be most welcome
Click to expand...

Can you measure the hole left after popping the old bush out? I can measure the bush I have here to see if it's the same.
 
Nodge68 said:
Can you measure the hole left after popping the old bush out? I can measure the bush I have here to see if it's the same.
Click to expand...

thats a good idea

went out in mine for the first time today no banging in gear changes and the only vibration is when the engine goes to normal idle speed but i cnt deffo live with it so thanks for the help King Nodge lol
 
matt1295 said:
thats a good idea

went out in mine for the first time today no banging in gear changes and the only vibration is when the engine goes to normal idle speed but i cnt deffo live with it so thanks for the help King Nodge lol
Click to expand...

You're welcome. The slight vibration should ease after a few hundred miles. The poly bush does appear to soften slightly after initial use ;)
 
Nodge68 said:
You're welcome. The slight vibration should ease after a few hundred miles. The poly bush does appear to soften slightly after initial use ;)
Click to expand...

bet not tell the wife that bit lmao as she was enjoying it this morning

only problem i had was 1 of the captive nuts came off so tighten it best i could until i get time to grind the side of the bracket off and use a nylon nut
 
Cheers chaps I've ordered the 56mm bush if its to small I'll make a steel insert to fill the gap so to speak. But with a bit of luck it WILL fit!! Not got much time on the ramps as they are booked up so its a case of get it on fix and get it off job done! Just waiting for it to turn up now. I'll let you know how it goes!!!
 
You must log in or register to reply here.

Similar threads

B
Fitting an Android head unit to 2012 FL2 TD4 base model with small dash screen
Replies
6
Views
727
Nodge68
Nodge68
Andy Warren
Freelander 1 TD4 lower tie rod
Replies
3
Views
570
andyfreelandy
andyfreelandy
J
Freelander 1 Simple solution for TD4 "lifter tick" / tappety sound...
Replies
1
Views
623
andyfreelandy
andyfreelandy
RustyAdds
Gear selector yoke bush issues
Replies
0
Views
334
RustyAdds
RustyAdds
300bhp/ton
Freelander vs Range Rover off road flex test....
Replies
16
Views
2K
GrumpyGel
GrumpyGel
Back
Top