swivel pin bolts

sergeantcookie · Jun 9, 2010

hey guys, i purchased some swivel pin bolts the other day (part number 235357) and i went to fit them today and they were slightly too wide. Does anyone actually know what size these bolts are? Or does anyone have any spare ones knocking around, I only need one.

They are for a 1988 90

Cheers

james_hillerby · Jun 9, 2010

Top swivel pin bolts are M10 and bottom bolts are M8.

sergeantcookie · Jun 9, 2010

james_hillerby said:
Top swivel pin bolts are M10 and bottom bolts are M8.

aah nice one mate

sergeantcookie · Jun 10, 2010

The Haynes manual says these should be 65nm, is this right as this seems very loose?

Cheers

james_hillerby · Jun 10, 2010

I think its 25nm for the bottom ones and about 60nm for the top ones but dont go by that check first. I have done all mine numerous times to these torques with no problems.

Obviously you will need to clean up any old threadlock and grease off the bolts and the threads and run a tap through the thread before applying more threadlock and refitting.

Beast o Bodmin · Jun 11, 2010

james_hillerby said:
I think its 25nm for the bottom ones and about 60nm for the top ones but dont go by that check first. I have done all mine numerous times to these torques with no problems.

Obviously you will need to clean up any old threadlock and grease off the bolts and the threads and run a tap through the thread before applying more threadlock and refitting.

yep,clean em and glue em...

some one that does stuff proper innum makes it all the worth it....

swivel pin bolts

sergeantcookie

Active Member

james_hillerby

New Member

sergeantcookie

Active Member

sergeantcookie

Active Member

james_hillerby

New Member

Beast o Bodmin

Banned

Similar threads