Steeringwheel; replacing a disco mk1 for the original on my series 3 lightweight!!!!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
1

1979 lightweight

New Member
Posts
14
Location
Hedon, Near Hull
If anyone can help, i would be eternally grateful!!

Having read a post on here a while back, i found it was allegedly possible to fit a disco mk1 steering wheel straight on a series 3?
I bought a mk1 wheel but it seems to not fit on too easily; do i keep hitting it hard with my bolster hammer!?

Confused :doh:
 
Erm!!! :confused:

I will be using it for road use most of the time and it is a little smaller; making it a tad more room in the cab!

You obviously dont wish to assist me then?

I appreciate most people dont agree, but it is my motor to be fair.

Regard Chris
 
I meant it's just a bit meeeh tbh. I've covered 30k
In two years in a series III
With no mods!

Is it possible to get the splines from
The original and insert them in the disco one?
 
You must log in or register to reply here.

Similar threads

B
Chassis replacement on Air Portable series 3
Replies
3
Views
2K
yfo866
yfo866
Kiwi Landie
Series 3 Rebuild Series 3 Suffix B gearbox as Suffix D
Replies
12
Views
2K
BikerB
BikerB
Wal88
Series 3 2.25 petrol - fan rubbing on plastic radiator cowl
Replies
8
Views
1K
Wildefalcon
W
T
New to the world of old landys and would be very grateful for some advice
Replies
8
Views
892
Tommyk28
T
R
Series 3 Lightweight Wheels - what should be fitted?
Replies
13
Views
5K
RatleyRambler
R
Back
Top