doh91
New Member
- Posts
- 60
- Location
- Birmingham
When i am driving along at about 30mph and there are small bunps in the road the sterring shakes really bad just seeing if any of you had any ideas of what it is .
steering shaking
- Thread starter doh91
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jzcktv
New Member
- Posts
- 646
- Location
- Near Reading, Berkshire UK
Shock absorbers shagged, radius arm bushes likewise, swivel pre-load too low, steering ball joints shagged or anti-roll bar bushes going soft.
Mine does it too but at higher speed and I'm working my way through the above list. Shockers massive improvement, roll bar bushes cheap and easy, found some play in my drop arm ball joint so I'm doing that next week after that will come swivel pre-load check / re-shim. It's always the last thing you do, so mine will be Radius arm bushes, which seem a little soft.
Hope that helps.
Mine does it too but at higher speed and I'm working my way through the above list. Shockers massive improvement, roll bar bushes cheap and easy, found some play in my drop arm ball joint so I'm doing that next week after that will come swivel pre-load check / re-shim. It's always the last thing you do, so mine will be Radius arm bushes, which seem a little soft.
Hope that helps.
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
Steering damper, swivels pre loading, railco bushes. and as above. Mine does it really bad am not sorting it till i fit another different ratio diff in an axle thats in better nick to the one currently fitted. I'm pretty sure the front radius arm polybushes that have worn out after 8 months have alot to do with it also. Jai
