Starter motor

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
F

Fishdiggerdave

New Member
Posts
3
Location
Abergele
after some advice went to my old Landy over the weekend and it wouldn’t start,thought flat battery so put another one on it fully charged but still the same,lights work horn works ignition lights come on but when I push starter button nothing any advice greatly appreciated,it’s an old 19j engine in a series 2a,thanks
 
Welcome
Try a jumper lead from battery direct to starter bypassing the solenoid , if this turns starter then check the thin solenoid wire is connected and live when starting with test bulb / meter
How long since it last started/ turned over
 
Hi thanks for reply will try this,tried it a couple of weeks ago but battery did not have enough umph to start it but it turned over,tried it Saturday this time it would not turn over so charged up spare battery (which is a good one) tried that buT
t nothing lights work ignition comes on press starter button but nothing,cheers
 
If the motor is turning and engine not the solenoid throws the gear into place when energised best strip motor off and check the gear is being thrown out to engage the flywheel.
 
You must log in or register to reply here.

Similar threads

S
starter motor questions
Replies
17
Views
2K
McBoon
McBoon
O
Electrical - starting fault/issue (seeking help/advice) - 1996 Defender 110 300TDI
2
Replies
27
Views
1K
tottot
tottot
K
Disco 4 (LR4) xenon lights
Replies
0
Views
486
kiven
K
M
Starter problems on 1996 300TDI 90.
Replies
2
Views
558
M1CYO
M
D
L322 UO100 63 fault code
Replies
2
Views
719
Graculus
Graculus
Back
Top