snorkle- home made-ish

brockus · May 29, 2010

hello

a friend of mine said he would make me a snorkle out of some stainless steel... for the outside.... but wat would he use to run it in the inside???

i was goin to get a safria 1 but the plasic and the damage on the outside of the wing put me off!!!

would u use this in this link ...blank pipe thing??

http://www.landyzone.co.uk/lz/f8/started-fit-southdown-snorkel-84503.html

and do u run it through the wing or pass the window wash ???

cheers anthony

The Mad Hat Man · May 29, 2010

why run it outside the wing? run it inside - it is easier and its protected.

Grippa · May 29, 2010

The Mad Hat Man said:
why run it outside the wing? run it inside - it is easier and its protected.

In fact remove yer outer wings and never replace them. It's the fashion dun'tcher know.

The Mad Hat Man · May 29, 2010

u started on yours then?

brockus · May 29, 2010

well the reason im not gettin the safria is that reason in cas it gets damaged but is ther enough room between the inner wing to the bonet area ?? u no wer i mean ?? i have a 93 disco 200tdi.. ?? cos it looks tight ???

or would it go into the bonet area ??

The Mad Hat Man · May 29, 2010

brockus said:
well the reason im not gettin the safria is that reason in cas it gets damaged but is ther enough room between the inner wing to the bonet area ?? u no wer i mean ?? i have a 93 disco 200tdi.. ?? cos it looks tight ???

or would it go into the bonet area ??

It goes between the inner and outer wing.

brockus · May 29, 2010

ok cheers for the reply and would you use that black piping to run it in ther ??

cheers anthony

wiltshire landyman · May 30, 2010

if you break a safari one your doin summit drasticly wrong and im sure the rest of the motor would be damaged before you hit the snorkel

V8_Disco · May 30, 2010

i dont know anyone whose ever ever ever broken a safari (apart from the top bit on branches) it doesnt stick out much and its so high that if you ever managed to damage it the rest of the bodywork around it will also be fooked (as you will probably be on your side)

The Mad Hat Man · May 30, 2010

brockus said:
ok cheers for the reply and would you use that black piping to run it in ther ??

cheers anthony

mine was.

snorkle- home made-ish

brockus

Active Member

The Mad Hat Man

Well-Known Member

Grippa

New Member

The Mad Hat Man

Well-Known Member

brockus

Active Member

The Mad Hat Man

Well-Known Member

Attachments

brockus

Active Member

wiltshire landyman

I’m back

V8_Disco

New Member

The Mad Hat Man

Well-Known Member

Similar threads