danshayler
New Member
- Posts
- 2
hi all, bought a 110 td5 a few months ago and stupidly didnt check if it went into high/low range, the seller said it all worked fine so...lesson learned!
anyway, the stick goes left to right but doesnt move out of high range, which is fine for now but i'd like to get it working...any advice? had a quick look at the linkage and theres a link going to the transfer box which selects hi/low range it seem seized as there is a flexible link with two locknuts either side of it which is slightly bent (presumably by people trying to force the stick)
am gonna soak it in wd40 where it goes into the transfer box and give it some persuasion tomorrow but any advice would be very welcome...
Cheers, Dan.
anyway, the stick goes left to right but doesnt move out of high range, which is fine for now but i'd like to get it working...any advice? had a quick look at the linkage and theres a link going to the transfer box which selects hi/low range it seem seized as there is a flexible link with two locknuts either side of it which is slightly bent (presumably by people trying to force the stick)
am gonna soak it in wd40 where it goes into the transfer box and give it some persuasion tomorrow but any advice would be very welcome...
Cheers, Dan.
