Disco 2 Seat lumbar support not deflating

mad85 · Aug 8, 2018

hi all, the passenger side lumbar support is not deflating... i have already tried switching the switch panel, so i think the issue is the seat itself... any idea how I can deflate it with the least amount of damage?

mad85 · Aug 17, 2018

no one?

sierrafery · Aug 17, 2018

check the 3A fuse in the sattelite fusebox and if it's good you have to remove the seat and undo the pipe which goes from the bladder to the lumbar deflate solenoid cos that might be fubar or there is a wiring issue on it's circuit

see RAVE - electrical library - connector views for C0974 and give a direct 12V to the purple/grey wire in it and if it doesnt deflate then the solenoid is gone, you might be lucky to find this connector unplugged or loosened

mad85 · Aug 17, 2018

thanks for your reply, so if i remove the seat i should have access to this solenoid without tearing the leather?

sierrafery · Aug 17, 2018

Yes, you should see it from beneath

mad85 · Aug 17, 2018

great, thanks for the information. will update post with what i find...

Disco 2 Seat lumbar support not deflating

mad85

Active Member

mad85

Active Member

sierrafery

Well-Known Member

mad85

Active Member

sierrafery

Well-Known Member

mad85

Active Member

Similar threads