Seat belt Anchor Passenger side

Need a clicky bit for a freelander passenger side. Anyone got one ?

Right I have a thingy. Has anyone swapped one? I haven't looked at freelander for a while and Is there anyone know how to change one?

Oi pooftahs does know one know then?

We int gay in ere. Find out fer yerself how ta fix it if yer gonna be nasty. :mil69:

Bet yer fort this would be a helpful reply anorl. :doh:

Hippo said:

We int gay in ere. Find out fer yerself how ta fix it if yer gonna be nasty. :mil69:

Bet yer fort this would be a helpful reply anorl. :doh:

Click to expand...

At least its a fookin reply. Anti sociable feckers

carnt ya unbolt the whole thing and replace that?


Anyways - why yo gorra gayboy toy?

The Mad Hat Man said:

carnt ya unbolt the whole thing and replace that?


Anyways - why yo gorra gayboy toy?

Click to expand...

Its more the sticky back bit....where does that slot into. also wheres it connect to for the seatbelt warning light And its me sisters car

have ya gorra microscope handy? .

Sirus said:

Its more the sticky back bit....where does that slot into. also wheres it connect to for the seatbelt warning light And its me sisters car

Click to expand...

Dunt think yer typin is camp enuff fer an answer from this lot

Bromsgrove Defender said:

Dunt think yer typin is camp enuff fer an answer from this lot

Click to expand...

Either that or their boyfriends int around to answer the question

There’s a torx bolt which goes through the side of the catch, to hold it on yer seat. Access is poor. Yer needs to either remove the 4 seat torx bolts un pull the seat back, or remove the cubby box – open, undo 4 screws, lift out inner tray, look inside and undo bolts holding cubby to floor, un lift up cubby and should be able to get access without removing central window switches.

Even a limp wrested dwarf like yerself could do it wiv a bit of help from yer sister.

Hippo said:

There’s a torx bolt which goes through the side of the catch, to hold it on yer seat. Access is poor. Yer needs to either remove the 4 seat torx bolts un pull the seat back, or remove the cubby box – open, undo 4 screws, lift out inner tray, look inside and undo bolts holding cubby to floor, un lift up cubby and should be able to get access without removing central window switches.

Even a limp wrested dwarf like yerself could do it wiv a bit of help from yer sister.

Click to expand...

Thank you mister hippo.... I'm donning my marigolds ready to start now. Should I require any other clothing modifications to complete the task?

Gimp suit?

Job done. Just popped the cover conceling the 2 scews on the centre console. Loosened it and slid it back so it was out of the way. Undid the torx bolt holding the sealt belt anchor and disconnected the wire. Removed old anchor and did the reverse process with the new anchor. Then disinfected myself for 20 mins under a warm shower using bleach.

Sirus said:

Job done. Just popped the cover conceling the 2 scews on the centre console. Loosened it and slid it back so it was out of the way. Undid the torx bolt holding the sealt belt anchor and disconnected the wire. Removed old anchor and did the reverse process with the new anchor. Then disinfected myself for 20 mins under a warm shower using bleach.

Click to expand...

Nice one Si.

Also glad you resisted the urge to add piccies......

Sirus said:

Thank you mister hippo.... I'm donning my marigolds ready to start now. Should I require any other clothing modifications to complete the task?

Click to expand...

Would have thought a warm coat would have bin the betterer option. Each too their own.