Rotten bulkhead

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Callum-d90

New Member
Posts
851
Location
dewsbury,yorkshire
Hi all, I'd like a little advise as to weather a td5 bulkhead would fit onto my 2.5 petrol 90 ive converted it to a 200tdi now needs a bulkhead and would like a td5 one for it.

Is it an easy swop? I'm a fabricator by trade so cutting/welding not a problem, it's more electics ect I'm bothered about
 
I shall have a rummage through google then, cheers buster

Is that for your v8?
the only real differences i notice between my 110 v8 and my old s3 is, the 110 has a fuse box under the dash and is therefore different in that area. the s111 has a notch that fits snug to the lower dash. If you have a look at my 110 rebuild thread you can almost see how the bulkhead looks empty. Windscreen hinge area also different
 
Hi all, I'd like a little advise as to weather a td5 bulkhead would fit onto my 2.5 petrol 90 ive converted it to a 200tdi now needs a bulkhead and would like a td5 one for it.

Is it an easy swop? I'm a fabricator by trade so cutting/welding not a problem, it's more electics ect I'm bothered about
its a common fix for rotten bulkhead ,there are all basically the same on defenders 90/110s as buster said just a few rivenuts ,and spray with thinned waxoyl or similar after inside all cavities after you get it built
 
If I get one with the td5 dash still attached it will go in then? It's the dash I'm after really with the centre console ect? As for wires they all similar?

Cheers for help lads :)
 
Like this:
 

Attachments

  • land rover 1 (150).JPG
    land rover 1 (150).JPG
    279.4 KB · Views: 774
Back
Top