Reverse light switch renewal

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Status
Not open for further replies.

bustersbus

Well-Known Member
Posts
13,755
Location
Near Dumfries, Scotland
Reverse light switch renewal

This is how ah did mine....
Firstly remove the middle seat and lift the lid to expose the top of the gear box. You should then see the switch. Undo the two wires and then loosen the lockin' nut.....
reverselightswitch002.jpg


reverselightswitch001.jpg

then just unscrew the old/faulty switch.

this is all ah used to do the job.. 17mm & 14mm spanner, a piece of wire with two blade connectors to see if it was a fault in the wiring, and the new switch...

reverselightswitch003.jpg


this is just a pic of the old and new switches...

reverselightswitch004.jpg


Then ah stuck it into reverse gear and screwed in the new switch. Ah put a big mirror rested against the wheelie bin so's ah could see when the light come on, then tightened the lockin' nut.......

reverselightswitch005.jpg


reverselightswitch006.jpg


That's it, job done;) :D
 
Status
Not open for further replies.
Back
Top