Kaijun
Active Member
- Posts
- 238
- Location
- Berkshire, U. K.
Hi! When I am replacing brake jump flexi hoses, I found the ABS module pipe flare nuts are in impact space for chassis. I wonder which way is better.
1. do/undo the flare nuts on-situ from the top pic. 1
no change, but hard to loose/tighten the nuts, probably two persons' work
2. loose the bracket of the jump flexi hoses by drilling out rivets pic. 2 as
it may loose ABS module to get more access to the nuts from the bottom.
Any suggestions are welcome!
1. do/undo the flare nuts on-situ from the top pic. 1
no change, but hard to loose/tighten the nuts, probably two persons' work
2. loose the bracket of the jump flexi hoses by drilling out rivets pic. 2 as
it may loose ABS module to get more access to the nuts from the bottom.
Any suggestions are welcome!
