Recovery Points?

Disco100V · Nov 13, 2009

Hi,

I am new to off-roading and I am in the process of preparing my landrover discovery 1. I am wondering where is the best place to attach my recovery points to at the rear. I am hoping the D-shape hoop and bolts will be adequate for the job. Any advise will be appreciated.

[JP] · Nov 13, 2009

tow bar...that's what I use...

it's a great recovery point, altough it can act as a mud plough too....

Disco100V · Nov 13, 2009

Yea was planning on taking that off.

Dent · Nov 13, 2009

I used some 6mm plate to stop the plough

stretchie_ · Nov 13, 2009

Disco100V said:
I am hoping the D-shape hoop and bolts will be adequate for the job. Any advise will be appreciated.

You'll be talking about JATE rings there pal. Just asked a similar question (kind of) over in this thread

http://www.landyzone.co.uk/lz/f8/d1-bolt-size-going-through-fron-chassis-89177.html

Bt there are a few threads knocking around just do a search

Dent said:
I used some 6mm plate to stop the plough

I like the idea of this, but I 'rescued' a tow bar off a Rangie classic, the same that was on older Disco's, so mud should just go over it. I just need to grind the bolts off so I can get it apart and a mates going to shot blast it and put a primer coat on it so I can hammerite it.

I've also heard of people altering the angle of the arms that go and attach further back down the chassis so that it does not hang as low, and then do the 5-6mm plate cover like you did to act as a skid pad incase you touch down

Then my mate is getting my original 'plough'.

200tdi ayre · Nov 15, 2009

ive reduced the plate height and relocated the bolts higher up so its only got 1 height but is level with the tank, gonna plate it soon

Disco100V · Nov 16, 2009

Cheers. Think JATE rings are the best option, thanks for the help.

Recovery Points?

Disco100V

Member

[JP]

New Member

Disco100V

Member

Dent

New Member

Attachments

stretchie_

Active Member

200tdi ayre

Well-Known Member

Disco100V

Member

Similar threads