Headtester
Active Member
- Posts
- 581
- Location
- Ruislip
My rear wiper recently stopped working, so did the rear washer. I checked all the fuses (all OK) and then removed the rear tailgate lining to discover a couple of chaffed wires that had rubbed bare on the strut bracing the rear wiper motor.
I've taped up the bare wires and now have rear wash but still no rear wiper.
Using a meter I get an intermittent 12 volt reading when the wiper switch is on and I can hear the relay working.
Any one got any suggestions on what to do next please?
I've taped up the bare wires and now have rear wash but still no rear wiper.
Using a meter I get an intermittent 12 volt reading when the wiper switch is on and I can hear the relay working.
Any one got any suggestions on what to do next please?