Rear wing trim on 110

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

timtheenchanteruk

Well-Known Member
Posts
4,633
Location
Leeds
Anyone got any pics of a 110 with the rear wings trimmed off a tad?

last twice I've been out, I've managed to catch and bend the rear wing just behind the arch.

I'm sure ive seen some pics of a 110 that's been trimmed back, but cant find any atm.

other option would be a bit of chequer, but i get the feeling that will only move the bend further up the panel when I catch it.
 

Attachments

  • IMG_5322.JPG
    IMG_5322.JPG
    367.3 KB · Views: 1,434
on a 90 the box section would be ok, but dont think it would work on a 110, not without some extra work to support the other end, there a bit more overhang.
 
something like this....... from an earlier thread I posted...

well......

measured up n started chopping.....

9690429383_aa1e82bf98_c.jpg


fitted the comp rear corners on the 110

9690432923_faf23d8ac2_c.jpg


got her outside....

9693672608_5404407801_c.jpg


then after cracking a windscreen trying to fit.... arghhhhh decide to trial fit the lro soft top , the original shrank and Exmoor gave lro a brand new one... so here it is new out the box :)

9693673682_d7943561e1_c.jpg


things are getting closer to the light at the end lol

9693677428_9ae860f8df_c.jpg


cheers steve
 
:eek: Tim, didn't know you caught it again last weekend

Perhaps we should just avoid Belford in future
 
not much damage, slight bend, but pulled the arch off at that corner.
Its been the arch thats caught both times, which in turn bends the panel, both sides match now at least :)

thems the pics I was looking for, knew id seen some...

right, might have to get some, pay day tuesday :) saves me fixing it :)
 
Back
Top