rear indicator

cueball · Sep 21, 2010

hey all just another one of my stupid questions here.

i need to change my rear passenger indicator bulb. how to i gett access s the the four bolts on the out side or some thing inside.

its a disco 2 td5

thanks

BIG MATT · Sep 21, 2010

Get underneath and have a look as im sure the indicaters in the bumper just clip out mines a 2001 td5 and the one above the exhaust on mine keeps getting a small amount of water in it, despite all the seals looking OK, think it must be the heat from the exhaust gases condensing, mind you might be talking ****e on that one.

Im sure they clip in and out once the wires are unplugged.

cueball · Sep 21, 2010

cheers mate will have a look

biggeeeee · Sep 21, 2010

When the facelift Disco TD5 came out (02 plate I think), the indicators changed to the cluster on the pillars and the reversing lights went south to the bumpers.
If you have a later Disco you will need to remove the 4 screws holding the unit to the pillar and remove the bulb holder to get access to the bulb.

cueball · Sep 21, 2010

ya mine is the 02 plate. will have look i when my lass gets bak with it. thanks

rear indicator

cueball

Active Member

BIG MATT

New Member

cueball

Active Member

biggeeeee

Retired - Living the dream

cueball

Active Member

Similar threads