Rear Door Hinge pins

4x4disco · Feb 7, 2011

Rear Door Hinge pins
Does anybody know if you can replace the rear door hinge pins (tailgate).
1996 Discovery 300tdi
Thanks
Sean

3ddisco · Feb 7, 2011

i dont think you can i may be wrong, but i changed mine last friday got it from lookers £51 it comes in plain silver so you might want to paint it, hope it helps

Dewin · Feb 7, 2011

4x4disco said:
Rear Door Hinge pins
Does anybody know if you can replace the rear door hinge pins (tailgate).
1996 Discovery 300tdi
Thanks
Sean

If the actual pins are knackered then are the hinges outer casing not also corroded? I'd imagine it'd be easier to just fit new hinges...

4x4disco · Feb 8, 2011

Dewin said:
If the actual pins are knackered then are the hinges outer casing not also corroded? I'd imagine it'd be easier to just fit new hinges...

It probably would be, but the new hinges are around £50 each, the pins if I can find some possibly £1 each
Sean

discool · Feb 8, 2011

The pins can be knocked out, but the disco ones look as if the pin was pressed in from the top of the hinge so that will involve removing the hinge and driving the pin out in reverse to the way it was pressed in ie. from underneath.

You may be able to purchase replacement pins not necessarily Land Rover but if not you will have to make your own out of silver steel rod of a dia/size to suit.

You may wish to look out for secondhand replacements.

BOZZ · Feb 9, 2011

the pins are pressed in , mine went i tried drilling them, i tried a big hammer none worked they where to solid and if you do get them out the outer hinges will be worn anyway, save your energy. i got two hinges from a scrap yard for £15, its ONLY two bolts and two rivets

4x4disco · Feb 10, 2011

thanks for all your help,
now looking at e bay, appears cheaper to buy the entire back door than just the hinges.
Sean

Rear Door Hinge pins

4x4disco

New Member

3ddisco

New Member

Dewin

Well-Known Member

4x4disco

New Member

discool

Well-Known Member

BOZZ

Member

4x4disco

New Member

Similar threads