Rear arb question

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

gR@HaM

Well-Known Member
Posts
1,095
Location
Cheshire
Does anyone know the size of the nut on the bottom link of the rear arb? Also is it opposite thread? Would like to know before I buy the wrong tool, have measured 22-23mm but its in a bit of a mess and don't want to resort to grinding it off and relacing unless I have to..
 
I took mine off my new car at weekend, sure it was 19mm, remember to remover split pin first, or at least most of it, impact gum ripped the remnants out!! Lol :)
 
Impact GUN! :) retardation caused by budwieser! :)

I didn't see a nut bigger than 19 on any of the rear arb or mounts or rear springs, shocks or relocation cones, was I ****ed again!!! Lol
 
I took mine off my new car at weekend, sure it was 19mm, remember to remover split pin first, or at least most of it, impact gum ripped the remnants out!! Lol :)
Yep the top of the link is a 19mm with split pin but bottom is bigger
 
Besides rear arb nowt but nuisence if your off roading, all they do is turn drop links upside down and try pushing your springs off there seats! :(
 
Besides rear arb nowt but nuisence if your off roading, all they do is turn drop links upside down and try pushing your springs off there seats! :(

thank fook for that!!! i thought i'd had a moment of madness an not put mine back on properly, but i'd been laning a few days before so thats the cause!!!!!!
 
Rip the lot off! :)

gave me loads more articulation without too much more body roll, I would leave the front alone tho! :)
 
Back
Top