Range rover L322 brakes locking up

Hi folks new to the forum and need some advice, I have a 2004 l322 diesel and recently i had a burst brake pipe. Once this was repaired I had a hard time to bleed through....then the problems started, all four brakes locked up ...I contacted local garage who bleed the system again ..only lasted a couple of miles and it locked up again..the system has been flushed about 5 times now in case of contamination..up to now I have changed master cylinder and ABS module. Today i changed the brake servo only to find brakes are hard as if no servo asistance ..(vacuum press is good at pump ).

Before all this brake pipe happend the jeep was running great.

Hi mate i have this exact same issue, when i unplug the ABS module the brakes free up. Can i ask what was the solution please?

Some peeps on ere will get upset if you call it a j**p.

Welcome to the forum both of you.

This section is for introductions only. For technical help you will get a better response by posting your questions in the vehicle specific sections listed below, where owners of those vehicles will offer more detailed advice. Don't worry, a lot of new members post questions in here.

Main forum index:
https://www.landyzone.co.uk/forum

Range Rover:
https://www.landyzone.co.uk/forum/range-rover.10

And that post is 4 years old so don't expect a reply