Sport Range Rover HSE

Stevewhiting

New Member

Posts

7

Location

Southall. Middlesex

• Aug 5, 2018

• #1

Hi all. I have just bought myself a 2013 RR HSE sport. 3.0 Diesel. low mileage FSH, my issue is when I accelerate sharpish I get followed by a plume of white smoke
Any suggestions / ideas whet the problem could be is greatly appreciated.

 

wammers

No longer with us, RIP

Donater

Posts

58,170

Location

Preston Lancs.

• Aug 5, 2018

• #2

Either burning coolant or low compression on one or more cylinders.

 

brianp38dse

Well-Known Member

Posts

20,093

Location

heathrow

• Aug 5, 2018

• #3

If you have just bought it take it back and et them to fix it.

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

Posts

16,479

Location

North Dorset - Near the East & West Stours

• Aug 5, 2018

• #4

White smoke is unburnt diesel

 

tarphenry

Well-Known Member

Posts

1,540

Location

bury lancs

• Aug 5, 2018

• #5

or steam

 

Stevewhiting

New Member

Posts

7

Location

Southall. Middlesex

• Aug 5, 2018

• #6

Thanks for your comments, As this has a warranty supplied I think I will get this checked out.................

 

Datatek

Well-Known Member

Posts

45,015

Location

Near Poitiers SW France

• Aug 5, 2018

• #7

Stevewhiting said:

Hi all. I have just bought myself a 2013 RR HSE sport. 3.0 Diesel. low mileage FSH, my issue is when I accelerate sharpish I get followed by a plume of white smoke
Any suggestions / ideas whet the problem could be is greatly appreciated.

Click to expand...

2013, does the car have ADDBLUE?

 

T

tomcat59alan

Well-Known Member

Posts

18,611

Location

wirral and triquivijate

• Aug 5, 2018

• #8

In the old days I would be checking the brake master cylinder weeping into the servo.

 

sheriff

Active Member

Posts

296

Location

Barnsley,Land of the Black Gold

• Aug 7, 2018

• #9

Take it back, there is a problem with the turbo on the 3ltr diesel, Landrover know all about it. It is I believe related to the oil return from the turbo. It was apparently too low in the sump so that when the little turbo (of the 2) which is meant to reduce lag during heavy accel spools up it seems to create so much a vacuum oil is actually sucked back up the return through the seals and blown out the exhaust without ever going through the engine, hence the whiteish colour of the “smoke screen”
There is a landrover tech bulletin and a mod which I believe involves fitting a non return valve in the oil return line and moving the return higher up the sump where it can’t suck up oil.
Hope this helps