range rover 02 bmw t/d

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Z

zuludawn

New Member
Posts
3
Location
melton mowbray, leicestershire.
Hi all, got a customers range rover with non start problem, the vehicle immobilizer is ok,it spins over ok, plugged into my omiscan 2, it has three unknown codes,dtc3505--dtc 1260--dtc 09f6. owner said it had this prob once before but managed to start it with a jump pack even so it turned over on its own battery.any pointers please chaps?:confused:
 
think 1260 is vehicle mobilised, engine ecu and bcem are known to loose sync, is the glow plug light working? (common indicator of lost sync)

B1260 Solar Radiation Sensor Circuit Short To Battery
09F6(fuel rail pressure)

Hopefully someone will confirm

Oh and in tank fuel pump a known problem
 
Last edited:
check that you have fuel pressure, I'm guessing as I don't have my obd code list with me
 
As fanatic says the BECM (Body Electronic Control Module) under the drivers seat can "forget" the code issued from the engine ECU. With the right gear its a 2 min job to re-write the code. You will need a standalone Sync Mate, Faultmate or Testbook LR specific diagnotic gear if this is your problem. It is a P38 or MK2 Range Rover isnt it ?
 
You must log in or register to reply here.

Similar threads

J
Range Rover sport SDV6 NOT STARTING!
Replies
3
Views
1K
AllanWorms
AllanWorms
DollyBird
Engine disabled, keys not working, tried the guide “Re-synching the Range Rover P38 diesel engine with the Solved - BECM using a Nanocom” no luck
Replies
9
Views
1K
DollyBird
DollyBird
D
Rebuilded range rover 4.4l diesel 2016 vouge
Replies
1
Views
2K
v8250
v8250
J
Range Rover Sport 2007 turns over but wont start
2
Replies
24
Views
4K
brianp38dse
brianp38dse
S
Fl 2 Engine Failure
2
Replies
38
Views
5K
coltron1
C
Back
Top