Henry.adams
Active Member
- Posts
- 111
- Location
- Kent uk
I own a discovery 2 v8 with a r380 in it which no longer works. I have a spare lt77 lying around anyone know if it will fit. I have heard very mixed answers any help would be much appreciated.
r380 and lt77
- Thread starter Henry.adams
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
sierrafery
Well-Known Member
- Posts
- 17,103
- Location
- Arad/Romania
Henry.adams
Active Member
- Posts
- 111
- Location
- Kent uk
Even if I swap the bell housing ?
sierrafery
Well-Known Member
- Posts
- 17,103
- Location
- Arad/Romania
That's above my knowledge but i remember that a friend of mine did that some time ago and he complained that it was not an easy job.... nor an improvement
Hicap phill
Well-Known Member
- Posts
- 15,397
- Location
- Wiltshire
If you swap the bell housing you will find the main shaft too short.
If you leave the original bell housing on, either engine/gear box will need relocating.
Looks like it’s a new correct box
Henry.adams
Active Member
- Posts
- 111
- Location
- Kent uk
Probably more likely scrap which is sad because you don’t see many v8 manuals but there is just not much worth saving on itIf you swap the bell housing you will find the main shaft too short.
If you leave the original bell housing on, either engine/gear box will need relocating.
Looks like it’s a new correct box
300bhp/ton
Well-Known Member
- Posts
- 4,733
- Location
- Near MK
It could be made to work, but would likely cost a fair bit more than sourcing a correct R380, which shouldn't be that difficult in the UK.
Henry.adams
Active Member
- Posts
- 111
- Location
- Kent uk
The old girl is getting striped for parts
Similar threads
