Mthompson
Member
- Posts
- 39
- Location
- North Yorkshire
On with changing my prop ujs is there one there with a grease point? Also what's best make to use
Thanks
Thanks
Freelander 1 Propshaft uj
- Thread starter Mthompson
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
GrumpyGel
Well-Known Member
- Posts
- 26,488
- Location
- Christchurch, New Zealand
Can you change the UJs by themselves?
I thought the F2 props and bearings were only available as a complete unit (so presumably the UJs are part of this).
I thought the F2 props and bearings were only available as a complete unit (so presumably the UJs are part of this).
Mthompson
Member
- Posts
- 39
- Location
- North Yorkshire
Looks to me like you can as there's clips and all that and seen them listed for them just done know if some are good
No grease able UJs are available for the FL1, unless you can find a grease able UJ from another vehicle which fits.
You can. New UJs are available.
It's a FL1, going by a previous post.
Mthompson
Member
- Posts
- 39
- Location
- North Yorkshire
No grease able UJs are available for the FL1, unless you can find a grease able UJ from another vehicle which fits.
You can. New UJs are available.
It's a FL1, going by a previous post.
Ye sorry clicked on wrong thing it is a fr1
