Please help!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
B

BIGMALUK

New Member
Posts
12
Hi nearly time to give up!

Have obtained EKA code from very friendly main dealer in Bristol.
No luck have tried all methods mentioned just cant seem to bypass imobiliser
Have had fob overalled i.e.lock button re soldered ,new battery and have been
told unit is transmitting .
Is there any other way PLEASE HELP. I have a DISCOVERY ES TDI Registered 01/08/95
 
1.click key to lock 4times then code
2.click key to lock hold for 5 secs then code
3.dealer suggested click key to unlock first
 
BIGMALUK said:
1.click key to lock 4times then code
2.click key to lock hold for 5 secs then code
3.dealer suggested click key to unlock first
Click to expand...

So U didnt't do the one from the book:
1. press unlock on the fob with starter switch turned on
2. press lock on the fob with starter switch turned on

By the way, during u introduced EKA did u get the signals from the alarm after each digit?
 
fanks for interest
key in start position and unlock and lock have worked in the past perhaps should have sorted then!
Had greenflag out last week not much help but did suggest fob overall
Dont know if signal worked after each digit sorry as i took it to an auto
 
fob used to work on doors untill recently
ALARM seem to develop a mind of its own going off for no reason and now no reponse from fob at all
red light is flashing now wether locked or not
 
BIGMALUK said:
1.click key to lock 4times then code
2.click key to lock hold for 5 secs then code
3.dealer suggested click key to unlock first
Click to expand...

Nr.1 is also mentioned but the condition is that the vehicle must be in an unlocked and disarmed state(that's handset resyncronisation) ......what I understand that yours isn't disarmed.
 
BIGMALUK said:
fob used to work on doors untill recently
ALARM seem to develop a mind of its own going off for no reason and now no reponse from fob at all
red light is flashing now wether locked or not
Click to expand...

So now alarm is armed and no connection with the fob's signal(if it is any).........It seems u have to plug it in a testbook:eek:
 
at the moment the disco is unlocked as cant risk random activations, if I lock it manually it can go off, if I open the door it will sound for 30 seconds, need to bypass the imobiliser somehow.
 
You must log in or register to reply here.

Similar threads

J
Help!
Replies
2
Views
974
miktdish
miktdish
R
P38A I’ll be first person ever with a fob Sync problem 😂 help please!
2 3
Replies
46
Views
5K
Rsjohnb
R
M
Disco 1 Possible Immobiliser issue?
2
Replies
28
Views
4K
MrPorky
M
M
EKA Code & Main Dealer.
2
Replies
24
Views
2K
Rubberknees
Rubberknees
v8metd2
D2 fob help. I’ve tried everything
2
Replies
33
Views
2K
v8metd2
v8metd2
Back
Top