Disco 3 (LR3) Parking space - body dimensions help needed.

I'm planning to switch from Jeep ZJ (I know, I know to Disco 4. We have quite a narrow parking space (324cm - ca. 127.5") so being able to get in and out reasonably easy is important especially since it would be our daily car. Having to squeeze into a dirty car through a tiny opening is what I'm worried about. And no, I cannot wash it everytime before I get home
Car dimensions are easy to find, but:
1. they include mirrors (folded/unfloded)
2. I would need door length and thickness to calculate this
3. It is easier to measure a real car

I would very much appreciate if someone could check dimensions of a Disco 4 for me.
There's none put up for sale reasonably close to where I live so I cannot do it myself.
No need to have them with crazy precision. A few milimeters or 1/4" off should still be ok.
- side to side, at the B pillar, preferably at the widest point
- door length - hinge to top corner (we have walls on both sides of the parking place)
- thickness of the door including interior upholstery.

greetings
Tom

Welcome to the forum!
Have a look on the Discovery part of the forum and maybe post this again there, to make sure the right people get to see it!

Thanks, hope to be able to contribute to the LR community sometime in the future.
My thread shows in "Land Rover Discovery" part as far as I can tell... but I'm new here and it's possible I'm wrong

D3 will be the same.

Stick up a line drawing of what numbers you need, easier to interpret than words.

lynall said:

D3 will be the same.

Stick up a line drawing of what numbers you need, easier to interpret than words.

Click to expand...

You're right Here's what I would need.
1. width
2. door length

3. door "thickness"