P38 tc light

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Landyrote

Member
Posts
37
Location
Lanzarote
Hi all Sunday I put a new uj on the car and thus removed front prop did the joint put it back no more vibration yay but !!!!!! Have a tc light on now error message and no speedo , what have I done wrong ?
 
Are the abs sensors pushed in correctly? Or have you disturbed any wiring to said sensors.
The speedo, tc and abs all use the abs sensors
 
+1 It is hard to believe you have damaged an ABS sensor or wire fitting a prop shaft. But it does appear that you have.
 
+1 It is hard to believe you have damaged an ABS sensor or wire fitting a prop shaft. But it does appear that you have.
Jacking it up and letting the axles hang with a cable that's incorrectly routed maybe? I must admit, I thought on first reading he meant he'd done the front cv joints, it was only when I re-read it that I realised it was the prop he'd done.
Note to self: read op carefully in future
 
Jacking it up and letting the axles hang with a cable that's incorrectly routed maybe? I must admit, I thought on first reading he meant he'd done the front cv joints, it was only when I re-read it that I realised it was the prop he'd done.
Note to self: read op carefully in future
Thanks guys I’ll give it a look over Saturday your the best been in lanzarote I’m stuck without you
 
Your a brave man having a P38 in the Canaries. Getting parts must be a nightmare and expensive, its bad enough for me with an old Clio. And as for the local drivers:eek: cannot count how many scars its got from car parks.
 
Back
Top